Filter
Top Products
OM-234 016 Page 21
224 940-E
3/40
3.5/45
2.5/30
2.5/35
3.5/40
3.5/50
4.5/35
4.5/32
5/50
5/40
5/45
5/35
4/55
4/55
2/30
2.5/25
5.5/60
8/70
8/60
5.5/85
6.5/70
5.5/55
6/40
7/90
7/75
10/95
10/70
10/80
10/65
10/60
8/50 10/55
10/95
10/805.5/50
3.5/45
6/45
6/55
4.5/55
4.5/70
4/35
6.5/80
6.5/70
NOTE: Settings are approximate. Adjust as required.
−−−" Means not recommended.
*" Thicker materials can be welded using proper technique,
joint preparation and multiple passes.
IMPORTANT: Match drive roll groove to diameter of wire being used.
Set Tension knob setting to 3 at start. Adjust tension
per instructions in the manual.
224 940−E
10/753/702/60
10/703.5/65
3/60
with optional Spool Gun. Order part no. 300371