Filter
Top Products
OM-1569 Page 12
3-3. Connecting Welding Gun And Optional Voltage Sensing Lead
ST-800 588 / Ref. S-0621-C
1 Gun Securing Knob
2 Gun Block
3 Gun Outlet Wire Guide
Loosen knob, insert gun end into
block. Position outlet wire guide as
close as possible to drive rolls with-
out touching. Tighten knob.
4 Gun Trigger Plug
5 Gun Trigger Receptacle
6 Voltage Sensing Clamp (Part
Of Meter Option)
Connect to workpiece.
7 Gun Holder
7
1
2
3
4
5
6
3-4. Connecting Shielding Gas And 14-Pin Plug
Ref. ST-801 155-A / Ref. ST-801 131
1 Gas Hose With 5/8-18
Right-hand Thread Fittings
(Customer Supplied)
2 Shielding Gas Cylinder
3 Valve
4 Flowmeter
Close valve on cylinder when fin-
ished welding.
5 14-Pin Plug
Tools Needed:
5/8 in
1
2
3
4
5