Filter
Top Products
OM-1546 Page 13
1 Pressure Assembly Adjust-
ment Knob
Lay gun cable out straight.
A Open pressure assembly,
hold wire tightly, and cut off
end. Push wire through
guides into gun.
B Close and tighten pressure
assembly. Press gun trig-
ger until wire comes out
gun.
C To adjust wire pressure,
feed wire against wooden
surface and tighten knob
so wire does not slip.
D Cut off wire, and close
door.
B
2-7. Threading Welding Wire
Tools Needed:
9/16 in
Ref. ST-158 897 / S-0627-A
WOOD
C D
A
Tighten
1