page 3
1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own
cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.
2. Wear ear protectors. Exposure to noise can cause hearing loss.
3. Keep hands away from all cutting edges and moving parts.
4. Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
5. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free re-
placement.
6. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to fi lter out microscopic particles.
SPECIFIC SAFETY RULES
FUNCTIONAL DESCRIPTION
1. Stop rotation knob
(Cat. No. 5315-21 & 5321-21)
2. Vibration Isolation System
3. Handle
4. Trigger
5. Power indicator light
6. Service indicator light
7. Speed control dial
8. Vibration isolation side handle
9. Depth gauge adjustment knob
10. Depth gauge
11. Dust shield
12. Bit release collar
4
8
11
12
Cat. No. 5315-21
9
10
3
2
1
5
6
7
No Load Revolutions per
Minute (RPM)
Double Insulated
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc.
Alternating Current
Amps
BPM
Blows per Minute
Mexican Approvals Marking
Specifi cations
Cat.
No.
5315-21
5315-22
5319-21
5321-21
5321-22
Percussion
Core
Bits
6"
6"
6"
6"
6"
Load/
No
Load
RPM
190-385*
190-385*
190-385*
190-385*
190-385*
Percussion
Carbide
Tipped
Bits
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Load/
No Load
Blows per
Minute
1700-3400*
1700-3400*
1700-3400*
1700-3400*
1700-3400*
Volts
AC
Only
120
120
120
120
120
Self-
Drilling
Anchors
5/8"
5/8"
5/8"
5/8"
5/8"
Chisels
See
p. 9
* EFCC - The Electronic Feedback Control Circuit maintains constant speed under
varying load conditions.
Amps
11
11
11
11
11