Milwaukee 5346-21 Power Hammer User Manual


 
page 3
3
6
12
2
1
5
4
7
8
10
11
1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a “live” wire will make exposed metal parts of tool “live” and shock the operator.
2. Wear ear protectors when using the tool for extended periods. Prolonged exposure to high intensity noise can cause hearing loss.
3. Keep hands away from all cutting edges and moving parts.
4. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a
MILWAUKEE
Service facility for a
free replacement.
5. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other masonry products, and
arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out
microscopic particles.
FUNCTIONAL DESCRIPTION
1. Rear side handle mount
2. Vibration Isolation System
3. Speed control dial
4. Handle
5. Trigger
6. Nameplate
7. Stop rotation knob
8. Bit lock (Cat. No. 5345-21)
Bit release collar (Cat. No. 5346-21, 5346-28)
9. Dust shield
10. Vibration isolation side handle
11. Depth gauge adjustment knob
12 Depth gauge
Cat. No. 5346-21 and 5346-28
Cat. No. 5345-21
SPECIFIC SAFETY RULES
8
9
9
Double Insulated
Symbology
Canadian Standards Association
Underwriters Laboratories, Inc.
Alternating Current
No Load Revolutions per
Minute (RPM)
Amps
Specifications
Cat.
No.
5345-21
5346-21
5346-28
Percussion
Core
Bits
6"
6"
6"
Load/
No
Load
RPM
150-400*
150-400*
150-400*
Percussion
Carbide
Tipped
Bits
1-3/4"
1-3/4"
1-3/4"
Load/
No Load
Blows per
Minute
1300-3450*
1300-3450*
1300-3450*
Volts
AC
Only
120
120
120
Self-
Drilling
Anchors
5/8"
5/8"
5/8"
Chisels
See
"Chiseling and
Chipping"
*
EFCC - The Electronic Feedback Control Circuit maintains constant speed under
varying load conditions.
No Load Blows per Minute (BPM)
BPM
Mexican Approvals Marking