Filter
Top Products
page 3
FUNCTIONAL DESCRIPTION
9
1. Vents
2. Cord
3. Dust bag (Cat. No. 6017 only)
4. Pad
5. Clamp lever
6. Clamp grip
7. Handle
8. On/Off switch
9. Punch plate (Cat. No. 6017 only)
1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden
wiring or its own cord. Contact with a “live” wire will make exposed metal parts of the tool “live” and shock the operator.
2. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out
microscopic particles.
SPECIFIC SAFETY RULES
Amps
Symbology
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Orbits
per Minute (OPM)
Orbits
per Minute
13,000
13,000
Volts
AC
115
115
Cat.
No.
6016
6017
Specifications
Amps
1.8
1.8
Pad Size
4-3/8" - 4"
4-3/8" - 4"
OPM
2
3
1
5
6
4
7
8
Double Insulated