Filter
Top Products
SP118 PAVEMENT SAW • OPERATION MANUAL — REV. #1 (05/03/12) — PAGE 19
COMPONENTS
For quick reference, Figure 3 highlights basic features of
the SP118 Saw.
1. Engine Stop Switch — Located on the handle bar,
easy toggle to STOP engine.
2. Anti-Vibration Handle Bar — Assists in the harmonic
damping of the saw. Adjustable in height and collapses
flush against the saw frame for efficient storage.
3. Water Connector — Standard garden hose connector
station to deliver cooling water to the blade.
4. Wrench (1.5" Box-end) — Use when removing the
Blade Shaft Nut.
5. Latch — Raise/Lower mechanical STOP.
6. Raise/Lower Hand Wheel —
Clockwise
to raise
blade out of cut —
Counter-clockwise
to lower blade
into cut .
7. Parking Brake — Mechanical clamping stop.
8. Wheels — Heavy-duty roller wheel bearings with
grease fitting.
9. Flange Cover — Guard required for protection as the
flange rotates during operations.
10. Blade Guard — Covers saw blade and flips up to allow
blade changes. Must be kept in place during sawing
operations.
11. Front Pointer — Adjustable device to allow accurate
blade tracking during sawing operations.
12. Engine — HONDA GX390 Gasoline Engine with
Cyclone air filtration and oil alert systems.
13. Lifting Bale — Over-center lifting point for safe
transportation of saw.
7
2
3
4
1
5
6
11
12
13
10
8
9
Figure 3. Components