Filter
Top Products
PAGE 12 — TANDEM ROLLER: T16 — PARTS & OPERATION MANUAL — REV. #2 (03/12/01)
Rollover Protection Structure (ROPS)
Please check the following:
■
The machine frame should not be bent or cracked around
the ROPS bolt on area.
■
There are no hairline cracks or open cracks.
■
All screw connections are correctly tightened (check correct
torque).
■
Bolts and nuts must be undamaged.
■
ROPS must be folded up (when tilting ROPS).
No modifications may be made on the ROPS without
authorization from the manufacturer!
Noise Level:
The following noise levels have been measured according to
the CE regulations 98/68/EWG.
■
Engine at nominal RPM
■
Microphone fixed at 1.2-meter height.
■
Measurement conditions:
■
hard ground, no snow, dry.
■
no noise reflecting objects within 20 meters.
■
wind noise must be below 10 dB(A) of the measured machine
noise values.
Noise level indications according to annex 1, Chapter 1.7.4f of
the CE machine’s specifications.
Noise at driver ear: 79,5 dB(A)
Constant noise level at 7 meters distance: 65,6 dB(A)
SAFETY INSTRUCTIONS