Filter
Top Products
TANDEM ROLLER: T16 — PARTS & OPERATION MANUAL — REV. #2 (03/12/01) — PAGE 17
OPERATION
Engine starting
1. Ignition lock
P ...................................................................... PARK
0 ...................................................................... OFF
I. ...................................................................... Ignition
II....................................................................... Pre-heat
III. ..................................................................... Start
2. Reversing lever
Bring into 0 position
3. Speed adjustment lever
Move the accelerator lever to the idle position (moving
downwards)
4. Ignition switch
Turn clockwise to position III. When the outside temperature
is below 0° C, first turn the ignition switch to position II and
wait until the preheat indicator on the instrument panel
goes off, then continue turning the switch to position III for
starting.