Filter
Top Products
FP-AI-112 and cFP-AI-112 2 ni.com
To install the FP-AI-112, refer to Figure 1 and complete the
following steps:
1. Slide the terminal base key to either position X (used for any
module) or position 1 (used for the FP-AI-112).
2. Align the FP-AI-112 alignment slots with the guide rails on the
terminal base.
3. Press firmly to seat the FP-AI-112 on the terminal base. When
the FP-AI-112 is firmly seated, the latch on the terminal base
locks it into place.
Figure 1. Installing the FP-AI-112
Installing the cFP-AI-112
The cFP-AI-112 mounts on a Compact FieldPoint backplane
(cFP-BP-x), which provides operating power to the module.
Installing the cFP-AI-112 onto a powered backplane does not
disrupt the operation of the FieldPoint bank.
To install the cFP-AI-112, refer to Figure 2 and complete the
following steps:
1. Align the captive screws on the cFP-AI-112 with the holes on
the backplane. The alignment keys on the cFP-AI-112 prevent
backward insertion.
2. Press firmly to seat the cFP-AI-112 on the backplane.
1 I/O Module
2 Terminal Base
3 Alignment Slot
4Key
5 Latch
6 Guide Rails
1
3
2
4
5
6