Filter
Top Products
NOTE: Certain “old work” or “retro-fit” boxes, such as the
Carlon B225R, have a plastic “lip” which interferes with the
Decora plate screws. This lip prevents you from being able
to tighten these screws completely. To make the clearance nec-
essary for these screws, you must remove the parts of the lip
causing the interference. There are two ways to accomplish this:
1. Drill through the lip of the box at the screw points.
2. Cut notches into the lip with a pair of diagonal cutters.
10
W
ALL
-M
OUNT
I
NFRARED
S
ENSOR
Figure 5
Installing the
Connector
DS00331ACN/WS100R 1/8/04 9:47 AM Page 12