Filter
Top Products
Intellipad Wiring
See your MSU manual if you are connecting the WS100R
with an IntelliPad system.
Operation
Operation of the WS100R is simple. Stand within the
operational range of your WS100R. Aim your hand-held
remote at the WS100R and press the button for the desired
command. Your IR command is instantly repeated to your
A/V equipment.
Green “Power Status” LED
When the WS100R is correctly connected (as shown in Figure 1),
the Green LED will stay lit as long as the preamp/receiver is
on. When your preamp/receiver is off, the LED will stay off.
Blue “Flash-back” LED
The blue “flash-back” LED on the WS100R visually confirms
the reception of an IR command.
W
ALL
-M
OUNT
I
NFRARED
S
ENSOR
11
DS00331ACN/WS100R 1/8/04 9:47 AM Page 13