Filter
Top Products
3G Travel Router t1 User Guide YMLT1WNYMLT1WNT1WN
10 www.netcomm.com.au
The LED Indicators of the 3G Travel Router t1
The Router has been designed to be placed on a desktop. The LED indicators are easily visible on the top of the Router to provide you with
information about network activity and status. See below for explanation of each of the features.
LED Icon Description
Power Lights up when powered ON.
3G Lights up when the router is connected via 3G.
Wireless Lights up when WLAN is enabled. Blinks on trafc.
WAN / LAN Light up when specic Ethernet connection is established, Blinks on WAN / LAN trafc
and Blinks on Temporarily overridden to LAN mode.
The Power LED - Displaying Power and Battery Status
When Router is switched on and battery inside
Green: power adapter is pluggedin and battery is fully charged
Green in ashing: power is provided by battery
Amber: power adapter is plugged in and charging the battery
RED: Battery power is low
When device is on without battery inside
Amber: Power adapter is plugged in
When device is off and with battery inside
Amber: power adapter is plugged in and charging the battery
The Connectors and Buttons of the 3G Travel Router t1
Side Ports
Reset Press once to initiate LAN port function. Hold this button down for 10 seconds to reset to factory
defaults.
WPS Button Press once to initiate Wireless Protected Setup
3G USB
Modem
USB port for connecting a compatible 3G USB Modem
WAN / LAN RJ45 WAN Ethernet port for a Fixed Line (ADSL/Cable/Satellite) network connection (factory
default) or LAN port for wired Ethernet clients (computers, laptops etc.)
Power Power connector, connects to DC 5V 2A Power Adapter