Filter
Top Products
YMLT1WN 3G Travel Router t1 User GuideT1WN 3G Travel Router t1 User Guide 3G Travel Router t1 User Guide3G Travel Router t1 User Guide
www.netcomm.com.au 19
NetComm Liberty Series - 3G Travel Router t1
DHCP (Auto cong)
This connection will get the IP address from the Internet service provider. Choose this connection if you are connecting the router to a
Cable Modem service. Leave everything as default unless instructed by your Internet Service Provider.
Name Description
Hostname Please input the host name of your computer. This is optional, and only required if your service provider asks you to do
so.
MAC Clone Please input the MAC address of your computer here if your service provider only permits computers with a certain
MAC address to access the Internet. If you are using the computer which used to connect to Internet via a cable
modem, you can simply press the ‘Default’ button to ll the MAC address eld with the MAC address of your computer.
Click Apply to save the settings.
PPPoE (ADSL)
Most ADSL services use the PPP over Ethernet protocol. Use this if you connect your 3G Router to a bridged ADSL modem.
Name Description
Username/Password Type in your PPPoE account username and password.
Operation Mode; There are 3 options:
‘Keep Alive’ Keeps the Internet connection alive, does not disconnect.
‘On Demand’ Only connects to the Internet when there’s a connect attempt
‘Manual’ Only connects to the Internet when the ‘Connect’ button on this page is pressed, and disconnects when the
‘Disconnect’ button is pressed.
MAC Clone Please input the MAC address of your computer here if your service provider only permits computers with
a certain MAC address to access the Internet. If you are using the computer which used to connect to the
Internet via cable modem, you can simply press the ‘Default’ button to ll the MAC address eld with the MAC
address of your computer.
Click Apply to save the settings.