Northern Industrial Tools DPC6410 Saw User Manual


 
16
Fuels
Caution:
The Power Cut uses mineral-oil products (gasoline and
oil).
Be especially careful when handling gasoline.
Do not smoke. Do not allow gasoline to come near ames,
sparks or re (explosion hazard).
Fuel mixture
The Power Cut is powered by a high-performance two-stroke
engine. It runs on a mixture of gasoline and two-stroke engine
oil.
The engine is designed for unleaded regular gasoline with a
min. octane value of 91 ROZ. In case no such fuel is available,
you can use fuel with a higher octane value. This will not affect
the engine.
In order to obtain an optimum engine output and to pro-
tect your health and the environment use unleaded fuel
only. Gasoline which contens alcohol should not used in
MAKITA products.
To lubricate the engine, use a two-stroke engine oil (quality grade
JASO FC or ISO EGD), which is added to the fuel. The engine
is designed for the use of MAKITA HP 100 high-performance
two-stroke engine oil at a mixture ratio of only 100:1 to protect
the environment. In addition, this ensures a long service life and
reliable operation with minimum exhaust emissions.
Gasoline
50:1
100:1
+
The correct mixture ratio:
100:1 When using MAKITA HP 100 high-performance
two-stroke engine oil, i. e. 100 parts gasoline
to 1 part oil.
50:1 When using MAKITA high-performance two-
stroke engine oil, i. e. 50 parts gasoline to 1
part oil.
24
25
22
23
1.0 Us-gal.
(3.7 l) 1.25 oz. (37 cm
3
) 2.5 oz. (75 cm
3
)
2.5 Us-gal.
(9.4 l) 3.2 oz. (94 cm
3
) 6.4 oz. (189 cm
3
)
5.0 Us-gal.
(18.9 l) 6.4 oz. (189 cm
3
) 12.8 oz. (378 cm
3
)