Omega Speaker Systems 1200W Router Router User Manual


 
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PBF-1200 07
Safety instructions
(b) Do not operate this machine in potentially explosive environments
containing combustible liquids, gases or dusts. Electric tools send out
sparks which may ignite dust or vapours.
(c) Keep children and other persons away from the electric tool during use.
When distracted, you may lose control over the apparatus.
2) Electric safety
(a) The plug of the machine has to be suitable for the socket. The
connector may not be modified in any way. Do not use an adapter plug
together with earthed devices. Unchanged connectors and fitting
sockets reduce the risk of an electric shock.
(b) Avoid body contact to earthed surfaces, such as pipes, radiator, stoves
and refrigerators. There is a higher risk of an electric shock, if your body
is earthed.
(c) Keep the machine clear of rain or humidity. The penetration of water
into an electrical device increases the risk of an electric shock.
(d) Do not use the cable for unintended purposes, to carry or suspend the
machine or to pull the connector out of the socket. Keep the cable clear
of heat, oil, sharp edges or any moving parts. Damaged or entangled
cables increase the risk of an electric shock.
(e) When using an electric tool in the open, use an extension cable only
which has been approved for outdoor use. The use of an extension
cable suitable for use in the open will reduce the risk of an electric
shock. Always use an RCD (redicual circuit device or circuit breaker).
(f) Hold the machine at the insulated gripping surfaces as the belt grinder
may hit its own power cord. Damaging a live cable may make metal
machine parts live, which may lead to an electric shock.
3) Personal safety
(a) Please pay attention and watch what you are doing, and carry out the
work with the electric tool sensibly. Do not use the machine, when you
are tired or under the influence of drugs, alcohol or medicine. A
moment of carelessness in the use of the machine could lead to serious
injuries.
(b) Wear your safety equipment and always put on safety goggles. Wearing
personal protective gear, such as dust mask, anti-skid safety shoes, hard
hat and ear protection, depending on the type of use of the electric
tool, will reduce the risk of injury.
(c) Avoid unintentional operation. Make sure that the switch is in the
“OFF” position before you remove the plug from the socket. If you have
Helpline No. UK / Northern Ireland 0870 7323023 • Rep. Ireland 1800 481005
Web Support: www.omegawolf.com/powercraft
Model Number:
PBF-1200 14
Operation
Height setting of the router column
Fig. G
Button (14) is used to set the maximum height of the router.
The plunge depth is then fixed. This is usually necessary when using the tool on a
special router table.
Rough setting:
Loosen the clamping lever (11). The router can then be pushed down against
the spring force.
Hold button (14) between your thumb and index finger.
Push the grey button (14) and use your other hand to push the router down at
the same time.
Release the button. The router is now locked and will no longer return to its
original position.
Fine adjustment:
Turn button (14) clockwise. This causes the router column to slowly move
down.
Turn button (14) counter-clockwise. This causes the router column to slowly
move up.
Setting the plunge depth
Fig. G
The plunge depth can be adjusted by using buttons 8, 9, 11 and 15. If the plunge
15
14
8
11
12
9
21