Filter
Top Products
Using the Menu Functions
16
[System Menu]
■ [Shipping Condition]
Resets all settings, including tuning data, to the original
condition.
– Access this function and follow the on-screen
instructions to complete the procedures.
– Initial Setup (p. 8) will automatically start after
[Shipping Condition] completes.
■ [System Update] (p. 18)
■ [Software Licence]
Displays the software licence information.
■ [System Information]
Displays the software version.
[Power Save]
Reduces brightness of picture to economise on power
consumption. [Off] / [On]
Using the [Tuning Menu]
Use the [Tuning Menu] to retune the TV automatically or
manually, add new channels, check signal conditions,
create your favourite channel lists, skip unwanted
channels, etc.
[Automatic Channel Search]
(TV mode only)
Retunes the channels received in your area
automatically.
●
Automatically searches and adds available channels to
the memory.
●
After the scan is complete, all previously saved
channels will be erased.
Automatic Channel Search
Searching channels...
Analogue : 0
Digital : 1
EXIT
RETURN
Scan
5%
●
When the operation is completed, the channel at the
lowest position will be displayed.
●
If tuning has not been done completely, perform
[Analogue Manual Tuning].
[Scan]
Adds new channels automatically to the channel list.
Example: Antenna
Scan
Searching channels...
Analogue : 0
Digital : 1
Scan
5%
[Analogue Manual Tuning]
Sets analogue channel manually.
Example: Antenna
Analogue Manual Tuning
Searching Channels
Scan up
Scan down
Start Frequency (MHz) 48.00
1 Enter the frequency to start scanning.
2 Select the scanning method.
OK
Select
• [Scan up]: Scans ascendingly from the entered
frequency to higher frequencies.
• [Scan down]: Scans descendingly from the entered
frequency to lower frequencies.
[DVB-T Signal Condition]
Shows the Digital TV signal condition.
Example:
DVB-T Signal Condition
Signal Level
Channel
Signal Condition
Bit Error Rate 0.00E-06
901
96
96
These bars show the maximum signal value of the
selected channel.
[DVB-T Manual Tuning]
Searches for the Digital TV channels manually.
All channels found will be added to the Channel List.
Select a channel position, then start tuning.
DVB-T Manual Tuning
Channel 901
Scan
Signal Condition
Signal Level
0%
96
96
Antenna
OK
Access
Change
[Favourites Edit]
Creates favourite channel lists from various
broadcasters.
Select a channel to add or remove from the list.
(
: Encrypted channel)
Favourites Edit
4
901
40
902
Digital
Analog
Digital
Analog
: Add
: Remove
OK
Add / Remove
Select
[Sk
Skips
Selec
Skip
4
901
40
902
OK
[So
Sorts
1 Sel
So
4
90
40
90
:
O
2 Sw
O
[Ch
Edits
1 Sel
C
4
90
40
90
O
2 Edi
Ch
Ne
Fre
Ch
So
Ch
Co
•Yo
•[F
ed
Sel
item
O
TH-50A430AZ_EN.indd 16TH-50A430AZ_EN.indd 16 2/19/2014 5:35:22 PM2/19/2014 5:35:22 PM