Parkside PBS 600 A1 Sander User Manual


 
12 GB/IE
Operation / Maintenance and cleaning / Service centre / Warranty
Material / type of
work
Rust removal
Coarse finish
(Grit grade)
40
Fine finish (Grit grade) 120
Preselected rotation
speed
medium / high (3-4)
Material / type of
work
Plastic
Coarse finish
(Grit grade)
120
Fine finish (Grit grade) 240
Preselected rotation
speed
low / medium (2-3)
Material / type of
work
Non-ferrous metals
(e.g. aluminium)
Coarse finish
(Grit grade)
80
Fine finish (Grit grade) 150
Preselected rotation
speed
medium / high (3-4)
©
Using the device in
a fixed mounting
˽ Turn the electrical power tool upside down as
shown in Figures D, F and place it on a stable
working surface.
˽ Insert the two clamps
11
into the recesses
2
provided for this purpose and clamp the electri-
cal power tool securely down on to the surface.
©
Tips and tricks
˽ Never use the same sanding belt to sand wood
and metal.
˽ Worn or ripped sanding belts can damage
the workpiece. Change sanding belts at the
appropriate time.
˽ Keep the sanding belt properly tensioned so
that it does not hang down too much and
become unusable due to nicks, creases etc.
©
Maintenance and cleaning
WARNING!
Before you carry out any work
on the belt sander always pull the mains plug out
of the mains socket.
The belt sander is designed to be maintenance-free.
˽ Clean the device frequently. This should be done
immediately after you have finished using it.
˽ Use a dry cloth to clean the device - never use
petrol, solvents or cleaners that attack plastic.
Emptying / cleaning the dust box:
˽ Simultaneously press the two release button(s)
6
and pull the dust box
5
backwards from of
the device.
˽ Empty the dust collection box completely by
knocking the dust out and place the dust box
back on to the device.
˽ Always keep the ventilation slots clear.
˽ Remove any adhering dust with a narrow
paint brush.
©
Service centre
½
WARNING!
Have your device re-
paired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
½
WARNING!
If the plug or mains lead
needs to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.
©
Warranty
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone