Filter
Top Products
8 GB/IE
Introduction
©
Included items
1 Engraver PGG 15 A1
1 Engraving stencil
1 Operating instructions
©
Technical details
Rated voltage: 230 V
~
50 Hz
Mode of operation: intermittent operation: S3 20%
Rated current: 0.15 A S3 20 %
Stroke rate: 6000 min
-1
Noise and vibration data:
Measured values for noise are determined in accordance with
EN 60745. The A-weighted noise level of the electrical power tool
are typically:
Sound pressure level: 74.4 dB(A)
Sound power level: 85.4 dB(A)
Uncertainty K: 3 dB
Wear ear protection!
Evaluated acceleration, typical:
Hand / arm vibration: 1.582 m / s
2
Uncertainty K = 1.5 m / s
2
WARNING!
The vibration level given in these instructions has
been measured in accordance with a standardised measurement pro-
cedure specified in EN 60745 and can be used to compare devices.