Filter
Top Products
12 GB/IE/CY
Drilling:
j Set the drill / hammer-action switch
1
to the
right into the
position.
Impact drilling:
j Set the drill / hammer-action switch
1
to the
left into the
position.
Note: The hammer-action drilling mode is intend-
ed for drilling into brick, concrete and stone only.
Q
Screwdriving
j The screwdriver attachments and bits must match
the screw head. Set the drill / hammer-action
switch
1
to the drill symbol and select 1st gear.
Q
Servicing and cleaning
WARNING!
DANGER OF INJURY!
Switch the device off and pull the plug out of the
mains socket before carrying out any work on the
device.
j Do not allow any liquids to enter the device.
Use a cloth to clean the device.
j Clean the device after you have finished using it.
j Do not under any circumstances use petrol or
strong solvents.
j Store the device in a dry room.
Q
Disposal
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical power
tools with the household rubbish!
In
accordance with European Directive 2002 / 96 / EC,
worn out electrical power tools must be collected
separately and taken for environmentally compatible
recycling.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out devices.
Q
Information
Q
Service centre
The service centre for your country is shown in the
warranty documentation.
WARNING!
Have your device repaired
only by qualified specialist personnel
using original manufacturer parts
only. This will ensure that your device remains
safe to use.
WARNING!
If the plug or mains lead
needs to be replaced, always have
the replacement carried out by the
manufacturer or his service centre. This
will ensure that your device remains safe to use.
First use / Servicing and cleaning / Disposal / Information
E3334_PSBM 850_Content_LB6.indd 12 11.04.2008 13:28:30 Uhr