Filter
Top Products
6 GB/IE/CY
2-speed hammer-action drill
PSBM 850
Q
Introduction
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the accom-
panying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.
Q
Proper use
The tool is intended for Impact drilling into brick,
concrete and stone as well as drilling into wood,
metal, ceramics and plastic. The clockwise/counter
clockwise rotation direction switch also allows the
device to be used as a driver. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
risk of accident. The manufacturer will not accept
liability for loss or damage arising from improper use.
The device is not intended for commercial use.
Figures A – E show the various possible applications
and uses.
The tools and materials shown in the example
applications are not included with the product.
Q
Features and equipment
1
Drill / hammer-action switch
2
ON / OFF switch
3
Lock switch
4
Speed preselector wheel
Introduction
The following pictograms are used in these operating instructions / on the device:
Read instruction manual! Drilling
Observe caution and safety notes! Impact drilling
Caution – electric shock!
Danger to life!
Wear hearing protection, dust protection
mask, protective gloves and protective
glasses.
Explosive material!
Keep children away from electrical
power tools!
Risk of fire!
Protect electrical power tools from
moisture!
V
~
Volt (AC)
Check that the device, mains lead
and plug are in good condition!
W
Watts (Effective power)
Dispose packaging and appliance in
an environmentally-friendly way!
Safety class II Quick-release chuck, Made in Germany
E3334_PSBM 850_Content_LB6.indd 6 11.04.2008 13:28:28 Uhr