Filter
Top Products
14 C1619M-I (11/07)
9. Place the unit onto the mount rails by sliding the chassis brackets onto the rails. This step may require two people to lift and slide the unit
into place. The unit should slide in and out of the rack easily. Refer to Figure 9.
Figure 9. Mounting the Endura Workstation into the Rack
10. After the unit is in place, tighten the two thumbscrews to secure the unit to the rack.
Figure 10. Tightening the Thumbscrews
WARNING: When sliding out the Endura workstation, be careful not to let the unit fall out of the rack.
THUMBSCREW
THUMBSCREW