Pelco C1943M Dust Collector User Manual


 
Pelco Manual C573M-D (11/03) 23
INSTALLING THE CM9760-MDA SETUP PROGRAM
The following procedure provides instructions to install the CM9760-MDA Setup program
on a PC that meets or exceeds minimum system requirements (see
System Requirements
above). (For information about connecting the PC to the CM9760-MDA, see
Connecting the
MDA to an External PC
earlier in this manual.)
To install the CM9760-MDA Setup program, do the following:
1. Start Microsoft Windows. If Microsoft Windows is already running, close any applica-
tion programs that may be running.
2. Insert the CM9760-MDA Resource CD into the CD-ROM drive.
The CD automatically starts and the CM9760-MDA Setup dialog box appears.
3. Click CM9760-MDA Software.
The Welcome dialog box appears.
4. Click OK.
The CM9760-MDA Setup software installation dialog box appears.
5. Begin CM9760-MDA Setup software installation by doing one of the following:
Install CM9760-MDA Setup software into the default destination directory by
clicking the button indicated in the on-screen instructions. The default installation
directory is as follows:
C:\Program Files\CM9760-MDA Setup\
If necessary, change the installation destination directory by clicking Change
Directory:
a. Enter or select the destination directory and then click OK.
The CM9760-MDA Setup software installation dialog box reappears.
b. Click the button indicated in the on-screen instructions to install the
CM9760-MDA Setup software.
The CM9760-MDA Setup – Choose Program Group dialog box appears.
6. Do one of the following:
Accept the default program group name, CM9760-MDA SETUP, by clicking
Continue.
Enter a new program group name or select a name from the Existing Groups list,
and then click Continue.
A message appears indicating that the CM9760-MDA Setup program was installed
successfully.
7. Click OK.