Pelco WS5000 Work Light User Manual


 
C4613M (3/09) 5
Recovering the System from a Recovery DVD
If the operating system software on the disk drive is so badly damaged that you cannot restore it directly from the drive, follow these instructions
to restore the operating system from the recovery DVD you received with the Endura workstation.
During this process you will be prompted to enter your Windows license number and your Endura workstation serial number. The oper
ating
system license number is located on the back panel of the Endura workstation. The serial number is located on the front panel of the Endura
workstation.
WARNING: Recovering the operating system with this method removes any files or applications that are currently installed on the disk
dr
ive. If possible, copy any important files from the disk drive to another location on the network, to a CD or DVD, or to a USB-connected
storage device before continuing.
1. Disconnect or remove all attached storage devices and remove all media from CD or DVD drives.
2. Place the recovery disc in the appropriate drive.
3. Restart the computer. Following the display of the BIOS screen, a message appears asking you to press any key to boot the syste
m from the
disc.
4. Press any key. A menu appears.
5. Select "Restore System to Factory Default.”
6. The system will restore in approx
imately 25 minutes and reboot into Windows.
7. When the system reboots, enter the Windows license number that you received with the Endura workstation.
8. Select the option to automatically activate your copy of Windows using Internet Explorer
®
, and then click Next. You must activate Windows
within 30 days of restoring it, or the operating system will stop working. Refer to Alternate Options for Activating Windows on page 6.
After the software is activated automatically, the computer restarts and loads the WS5070 User account.
9. Log off the WS5070 user and log on again as the WS5070 Administrator user. Contact a system administrator if you do not know the
password.
10. Locate and double-click the Initialize.bat icon on the computer desktop. A menu appears.
11. Select “Serialize your WS5070 workstation.”
12. Create a unique friendly name for the workstation.
13. Type the serial number for the workstation, and then press Enter. A summary of computer settings appears.
14. Review the settings, and then reboot the system.
15. Reinstall any additional software applic
ations that were on the workstation before you restored the operating system.