Filter
Top Products
OEM Catalogue 2009/2010 3.161
HID Lamps
HID -Basic ballasts for HPL, HPI (plus) lamps
Data valid for typical lamps
Ballast For lamps Ignitor Mains
Vol./Freq.
Without PF Correction With PF correction Ballast Losses Tw= 130°C
Δt
Wiring
diagram
Fig.
V/Hz
Current Nom
A
cosΦ
Cap.
µF/V
Mains
Max.
A.
Current
Nom.
A.
C
BHL 125L200 HPL 125W N.A. 220/50 1.15 0,55 10/250 1,1 0,7 12,2 70 1
BHL 125L202 HPL 125W N.A. 230/50 1.15 0,55 10/250 1,1 0,7 13,0 70 1
BHL 125L204 HPL 125W N.A. 240/50 1.15 0,55 10/250 1,1 0,7 13,7 70 1
BHL 250L200 HPL 250W N.A. 220/50 2.13 0,55 18/250 2,2 1,35 17,0 65 1
HPL 250W SI51 220/50 2.15 0,55 18/250 2,2 1,35 17,0 65 2
BHL 250L201 HPL 250W N.A. 220/60 2,13 0,0,55 15/250 2,2 1,35 15,5 65 1
HPL 250W SI51 220/60 2,15 0,55 15/250 2,2 1,35 15,5 65 2
BHL 250L202 HPL 250W N.A. 230/50 2,13 0,55 18/250 2,2 1,35 18,5 75 1
HPL 250W SI51 230/50 2,15 0,55 18/250 2,2 1,35 18,5 75 2
BHL 250L204 HPL 250W N.A. 240/50 2,13 0,55 18/250 2,2 1,35 20,0 75 1
HPL 250W SI51 240/50 2,15 0,55 18/250 2,2 1,35 20,0 75 2
BHL 400L200 HPI 400W N.A. 220/50 3,25 0,60 25/250 3,9 2,15 21,8 70 1
HPI 400W SI51 220/50 3,40 0,55 28/250 3,9 2,15 23,8 75 2
BHL 400L201 HPI 400W N.A. 220/60 3,25 0,60 20/250 3,9 2,15 20,0 70 1
HPI 400W SI51 220/60 3,40 0,55 25/250 3,9 2,15 22,0 75 2
BHL 400L202 HPI 400W N.A. 230/50 3,25 0,60 25/250 3,9 2,15 21,8 70 1
HPI 400W SI51 230/50 3,40 0,55 28/250 3,9 2,15 23,8 75 2
BHL 400L204 HPI 400W N.A. 240/50 3,25 0,60 25/250 3,9 2,15 23,0 70 1
HPI 400W SI51 240/50 3,40 0,55 28/250 3,9 2,15 25,0 75 2
For compatibility reasons we advice to use ignitors with Chinese orgin
(those are available on request)
Fig. 1
For full information on ignitors mentioned, please refer to separate product
data sheet.
Fig. 2