Philips M1192AN Stud Sensor User Manual


 
1
Product Overview
Three series of Philips reusable SpO
2
sensors offer monitoring capability
for a broad range of patient types as shown in the table below. Reference
Specifications later in this IFU for sensor accuracy.
A-Series Sensors: For use with any Philips/Agilent/HP instrument that
lists them as an accessory. Refer to your instrument’s Instructions for
Use for A-Series sensor compatibility information.
B-Series Sensors: For use with the same Philips/Agilent/HP
instruments that list A-Series M1191A and M1191AL sensors as
compatible accessories; i.e. M1191B can replace M1191A and
M1191BL can replace M1191AL.
Special Edition A-Series Sensors (AN-Series): For use with Philips
brand OxiMax® compatible instruments M1020B or M3001A, Option
A02. Also for use with the same Philips/Agilent/HP instruments that list
A-Series sensors as compatible accessories. Each Special Edition A-
Series sensor can replace its similarly numbered A-series sensor; i.e.
M1191ANL can replace M1191AL; M1192AN can replace M1192A;
M1193AN can replace M1193A; M1194AN can replace M1194A; and
M1195AN can replace M1195A.
1
These sensors have a Longer 3m (versus standard 2m) attached cable.
2
These sensors extend compatibility to Philips brand OxiMax® compatible instruments.
3
Preferred application sites for M1193A and M1195A sensors.
A-Series
Sensors
B-Series
Sensors
2
Special
Edition
A-Series
Sensors
Adult Pediatric Infant Neonate
Finger Ear Finger Ear
3
Finger
Toe
3
Hand
Foot
M1191A M1191B N/A 3
1
M1191AL
1
M1191BL
1
M1191ANL
3
M1192A N/A M1192AN 3
M1193A N/A M1193AN 33
M1194A N/A M1194AN 3 3
M1195A N/A M1195AN 33