Philips 9400 Planer User Manual


  Open as PDF
of 6
 
DPM-Menu
Low Power Mode
Switching the DPM On/Off
This menu offers you options for inputting user-defined designations, assigning key words, setting the
date and time, recording format and microphone sensitivity, (de)activation of the device signals and
voice-activated recording, switching the illumination on/off, changing the contrast, displaying the
remaining or used recording time and reformatting the memory card.
Access to the DPM menu:
• The DPM menu can only be accessed while the DPM is in stop mode.
• Press the jog shuttle for about two seconds. You can switch between the DPM menu items by turning
the jog shuttle: . A checkmark ( ) next to a menu item means that the corresponding setting
is activated.
Changing the settings:
• To select a menu item, for instance, to set the date and time, move the jog shuttle up or down to the
corresponding symbol.
• Press the jog shuttle to confirm the selection. This opens the menu item and allows you to make
changes to it. Confirm the changes by pressing the jog shuttle; this returns you to the DPM main
menu.
To leave the DPM menu, press the DEL button, wait 5 seconds or select the menu item to close the
DPM menu and confirm this by pressing the jog shuttle.
If the DPM remains inactive for longer than four minutes, it automatically switches to low power mode
and the device displays the date and time. - To reactivate the DPM, press any button or move the
4-position switch.
If the DPM is inactive for longer than 2 hours, the device automatically switches off. To reactivate the
DPM, use the lock/shift lock button of the 4-position switch.
Switching the DPM on: Unlock the 4-position switch by moving its centre part forward to the stop
position. The current file, the time recorded in the file, the total remaining recording time and, for
example, the current time are shown on the LC display.
Switching the DPM off: Move the 4-position switch to the stop position and push back the movable
centre part of the cap. This locks the 4-position switch and the device switches itself off.
Detailed operating instructions can be found on the supplied CD-ROM under „User Manuals".
Quick Reference
Instruction manual
 previous