Filter
Top Products
13
Planar Battery System BAT24SI
QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Battery System
Battery Components
Identify Connector Ports
Install Fuses
USING THE BATTERY
Charge Battery
Set Up Power Management
MAINTAINING THE BATTERY
Replace Battery
Troubleshooting
APPENDIXES
Battery Disposal
Specifications
To reinstall the battery system
1 Install new batteries into the tray. Replace both batteries at the same time.
Do not mix old and new batteries
2 Reconnect the battery cables to the controller board and to the four battery
terminals. Be sure that cable and terminal connections match RED-to-RED and
BLACK-to-BLACK. Push in each connector until you feel the connection click.
3 Reattach the retaining bracket with the two Phillips screws.
4 Push the battery tray all the way into the enclosure.
5 Reinsert the fuses. Use the flathead screwdriver to make a quarter turn
clockwise to secure each connection. Do not overtighten.
6 Plug in the power cord, USB cable, and power output cable.
7 Reinsert the Phillips screws on the back and front of the enclosure.