Filter
Top Products
PM5358 S/UNI-4x622 Driver Manual
Application Programming Interface
Proprietary and Confidential to PMC-Sierra, Inc. 54
Document ID: PMC-2010419, Issue 1
Side Effects
Changes the MODULE state to
SUNI4x622_MOD_IDLE
4.2 Profile Management
This section describes the functions that add, get and clear an initialization profile. Initialization
profiles allow the user to store pre-defined Device Initialization Vectors (DIV) that are validated
ahead of time. When the device initialization function is invoked only a profile number needs to
be passed. This method simplifies and expedites the initialization process.
Adding an Initialization Profile: suni4x622AddInitProfile
This function creates an initialization profile that is stored by the driver. A device can now be
initialized by simply passing the initialization profile number.
Prototype
INT4 suni4x622AddInitProfile(sSUNI4x622_DIV
*pProfile, UINT2 *pProfileNum)
Inputs
pProfile : (pointer to) initialization profile being added
pProfileNum : (pointer to) profile number to be assigned by the driver
Outputs
pProfileNum : (pointer to) profile number assigned by the driver
Returns
Success =
SUNI4x622_SUCCESS
Failure = SUNI4x622_ERR_INVALID_MODULE_STATE
SUNI4x622_ERR_INVALID_ARG
SUNI4x622_ERR_INVALID_PROFILE
SUNI4x622_ERR_PROFILES_FULL
Valid States
SUNI4x622_MOD_IDLE, SUNI4x622_MOD_READY
Side Effects
None
Getting an Initialization Profile: suni4x622GetInitProfile
This function gets the content of an initialization profile given its profile number.
Prototype
INT4 suni4x622GetInitProfile(UINT2 profileNum,
sSUNI4x622_DIV *pProfile)
Inputs
profileNum : initialization profile number
pProfile : (pointer to) initialization profile
Outputs
pProfile : (pointer to) contents of the corresponding profile
Returns
Success =
SUNI4x622_SUCCESS
Failure = SUNI4x622_ERR_INVALID_MODULE_STATE
SUNI4x622_ERR_INVALID_ARG
SUNI4x622_ERR_INVALID_PROFILE_NUM