Porter-Cable 33-402 Saw User Manual


 
23
PUSH STICK
Make from 1/2 OR 3/4WOOD
or thickness less than
width of material to be cut.
Cut here to push
1/4 wood.
Cut here to push
1/2 wood.
Notch to
help prevent
hand from slipping
1/2 Squares
CONSTRUCTING A PUSH STICK
When ripping work less than 4 inches wide, a push stick should be used to complete the feed and could easily be
made from scrap material by following the pattern shown in Fig. 58.
Fig. 58