Filter
Top Products
8
FUNCTIONAL DESCRIPTION
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the protective coating from
all unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone,
gasoline or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.
NOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE
CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED
IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE
ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO
ILLUSTRATE TECHNIQUE ONLY.
CARTON CONTENTS
FOREWORD
Delta’s 12" Radial Arm Saws are built for capacity with versatility. They have a full 3¾" depth of cut at 90°, and 2½" depth
of cut at 45°. The saws can crosscut 14-3/8" in a single pass. They also have a unique turret arm action which permits
the motor assembly to rotate 360° above the work table.
A. Fence
B. Table boards (4)
C. Table
D. Table mounting bracket (2)
E. Track arm end cap and stop
F. Overarm elevating handle
G. Cutting head clamp
H. Wrenches
I. Legs (4)
J. 12" blade
K. Special wrench socket
L.
1
/4"-20x
1
/2" hex head cap screw
M.
5
/
16" lock washer (2)
N. Round head screw (4)
O.
5
/16"-18x
3
/4" button head screws
P. Sheer pin
Q.
1
/
4" flat washer
R.
5
/16" flat washer
S.
5
/16" flat washer
T.
5
/16" hex nut
U.
5
/16" carriage head bolt
V. Cuttinghead assembly
W. Base and overarm assembly
C
J
DE
F
G
H
I
K
L
M
N
O
P
Q
R
U
T
S
V
W
A
B