Filter
Top Products
7
If an extension cord is to be used outdoors it must be marked with the suffix
W-A or W following the cord type designation. For example – SJTW-A to
indicate it is acceptable for outdoor use.
RECOMMENDED EXTENSION CORD SIZES FOR USE WITH PORTABLE ELECTRIC TOOLS
FOREWORD
The Porter-Cable Variable Speed Belt Sander (Model 352VS) is designed for
removing old paint and varnish, smoothing rough boards, and fine-surfacing
wood, metal, plastics, and other materials.
INSTALLING AND REMOVING THE ABRASIVE BELT
DISCONNECT TOOL FROM POWER SOURCE.
1. Place the sander on its left
side.
2. Pull the lever (A) Fig. 1 out
toward the front of the machine
to retract the idler pulley (B) and
release the tension on the
abrasive belt.
3. Remove the old belt.
4. Install the new belt with the
arrow (printed on the inside of
the belt) on the top and pointing
TOWARD the idler pulley.
Length of Cord in Feet
115V 25 Ft. 50 Ft. 100 Ft. 150 Ft. 200 Ft. 250 Ft. 300 Ft. 400 Ft. 500 Ft.
230V 50 Ft. 100 Ft. 200 Ft. 300 Ft. 400 Ft. 500 Ft. 600 Ft. 800 Ft. 1000 Ft.
0-2 18 18 18 16 16 14 14 12 12
2-3 18 18 16 14 14 12 12 10 10
3-4 18 18 16 14 12 12 10 10 8
4-5 18 18 14 12 12 10 10 8 8
5-6 18 16 14 12 10 10 8 8 6
6-8 18 16 12 10 10 8 6 6 6
8-10 18 14 12 10 8 8 6 6 4
10-12 16 14 10 8 8 6 6 4 4
12-14 16 12 10 8 6 6 6 4 2
14-16 16 12 10 8 6 6 4 4 2
16-18 14 12 8 8 6 4 4 2 2
18-20 14 12 8 6 6 4 4 2 2
Nameplate Ampere Rating
Fig. 1
A
B
FUNCTIONAL DESCRIPTION
OPERATION