Filter
Top Products
4
ADDITIONAL SAFETY RULES FOR DRYWALL SANDER
1. USE A RESPIRATOR approved by NIOSH for “Dust and Mist”.
Ventilate work area and/or use a dust collector. Continued and prolonged
exposure to high concentrations of airborne dust may affect the respiratory
system function.
2. MAINTAIN FIRM FOOTING AND BALANCE. Use appropriate
scaffolding. Do not overreach.
3. SANDING OF LEAD-BASED PAINT IS NOT RECOMMENDED. Lead
based paint should only be removed by a professional.
4. SOME WOOD CONTAINS PRESERVATIVES WHICH CAN BE TOXIC.
Take extra care to prevent inhalation and skin contact when working with
these materials. Request and follow any safety information available from your
material supplier.
5. WARNING: This tool was designed for certain applications. DO NOT
modify and/or use it for any application other than for which it was designed.
If you have questions relative to its application DO NOT use the tool until you
have written Porter-Cable and we have advised you.
Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305
SYMBOL DEFINITION
V ........................ volts
A ........................ amperes
Hz ........................ hertz
W ........................ watts
kW ........................ kilowatts
µF ........................ microfarads
l ........................ liters
kg ........................ kilograms
N/cm
2
........................ newtons per square centimeter
Pa ........................ pascals
h ........................ hours
min ........................ minutes
s ........................ seconds
........................ alternating current
3 ........................ three-phase alternating current
3
N ........................ three-phase alternating current with neutral
........................ direct current
n
0
........................ no load
........................ alternating or direct current
........................ Class II Construction
........................ splash-proof construction
........................ watertight construction
…/min ........................ revolutions or reciprocation per minute
904374- 06-26-02.qxd 7/11/02 8:12 AM Page 4