Filter
Top Products
8
3. Observe fastener icon (A) Fig. 19A. Insert fasteners (B) Fig. 19A with
points down (C) Fig. 19A. Slide fasteners forward to the front of the
magazine. The magazine will hold two full strips of fasteners.
IMPORTANT: Fasteners must point in the same direction as they will be
driven.
4. Feed the strip of fasteners into the magazine (“T” slot), until they are past
the spring (A) Fig. 20.
5. Pull the follower (B) Fig. 21, all the way to the rear of the magazine and
release. The follower will apply pressure to the strip of nails to feed it into the
driving mechanism.
6. Adjust directional exhaust deflector (A) Fig. 22, so that the exhaust air
blast will be directed away from the operator. The exhaust deflector provides
seven detented positions for directing the exhaust blast away from the
operator. Grasp the deflector and rotate it to the desired position for the
current application.
Fig. 21
B
Fig. 19A
Fig. 20
A
B
C
A
←
←
←
Fig. 22
A
Fig. 23
S