Porter-Cable PSH3 Paint Sprayer User Manual


 
3 - ENG
D25800
SPECIFICATIONS
Prolonged exposure to air spray can result in per-
ma nent damage to hear ing.
Always wear hear ing protection when operating
spray equip ment.
Spray guns op er ate at pres sures and velocities
high enough to pen e trate human and an i mal flesh,
which could result in am pu ta tion or oth er serious
injury.
! See a phy si cian im me di ate ly!
Never place hands in front of noz zle.
Direct spray away from self and others.
HAZARD
WHAT COULD HAPPEN HOW TO PREVENT IT
Risk of flying objects
HAZARD
WHAT COULD HAPPEN HOW TO PREVENT IT
Risk of injection
Certain parts are under pressure when ev er the gun
is con nect ed to a pres sur ized air line. These parts
may be pro pelled if the gun is dis as sem bled.
Disconnect the gun from the air line, or com plete ly
de pres sur ize the air line when ev er the gun is to be
disassembled.
Compressed air may propel dirt, met al shavings,
etc. and possibly cause an injury.
Never point any nozzle or sprayer toward a per son
or part of the body.
Always wear ANSI 278.1 safety approved goggles
or glasses when spraying.
Before dis as sem bly or re mov al of any part of gun or attached
components, shut off com pres sor, release pressure by de press ing
trigger, and disconnect power source.
NEV ER as sume system pres sure is zero!
TO AVOID CREATING AN EXPLOSIVE ATMOSPHERE, WORK ONLY
IN WELL VENTILATED AR EAS.
USE OF A FACE MASK IS RECOMMENDED TO PRE VENT
HIN HA LA TION OF TOXIC MA TE RI AL.
GENERAL INFORMATION
Air Inlet 1/4 NPS
Maximum Air Pressure 100 psi.
Recommended Operating Air Pressure 60 psi.
Cup 20 oz (600 cc)
Air Consumption @ 40 PSI 9.6 SCFM