Powermatic PF-33 Welder User Manual


 
8
Unpacking
Open both cartons and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the Stock
Feeder is assembled and running properly.
Compare the contents of the cartons with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read the instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Contents of the Shipping Container
Carton #1:
1 Stock Feeder
1 Grease Gun (grease not included – follow
instructions on its packaging to fill)
1 Boring Template
1 Owner's Manual (not shown)
1 Warranty Card (not shown)
Carton #2:
1 Feeder Mounting Assembly
1 Handle
1 Over Arm
1 Over Arm Cone Assembly
4 Hex Cap Screws, M12x50 (not shown)
4 Spring Washers, M12 (not shown)
Figure 2
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.