Quantum 1400 Stud Sensor User Manual


 
21
Quantum Jazzy 1400 Series Rev C Feb 04 www.pridemobility.com
Manual Freewheel Lever
For your convenience, your power chair is equipped with one of two manual freewheel levers. See figures 5, 5a, 6, and 6a. These levers
allow you to disengage the drive motors and maneuver the chair manually.
WARNING! Do not use your power chair while the drive motors are disengaged unless you are in the
presence of an attendant! Do not disengage the drive motors when your power chair is on an incline. The
chair could roll down on its own, causing injury!
CAUTION! It is important to remember that when your power chair is in freewheel mode, the braking
system is disengaged.
To operate the manual freewheel lever (1400 and 1420):
1. Pull the manual freewheel lever out and rotate clockwise for freewheel mode (drive disengaged.) See figure 5.
2. Rotate the manual freewheel lever counterclockwise for drive mode (drive motors engaged.) See figure 5a.
To operate the manual freewheel lever (1470):
1. Push the safety latch in and pull up the manual freewheel lever for freewheel mode (drive disengaged). See figure 6a.
2. Push the manual freewheel lever down for drive mode (drive engaged). See figure 6b.
NOTE: If the lever is difficult to move in either direction, rock your power chair back and forth slightly. The lever should then
move to the desired position.
IV. THE QUANTUM JAZZY 1400 SERIES
Figure 6. Freewheel Mode (Drive Disengaged)
Figure 6a. Drive Mode (Drive Engaged)
SAFETY LATCH
MANUAL FREEWHEEL
LEVER
Figure 5. Freewheel Mode (Drive Disengaged) Figure 5a. Drive Mode (Drive Engaged)
MANUAL
FREEWHEEL LEVER
MANUAL
FREEWHEEL LEVER