Filter
Top Products
What to do if . . .
5
Return to Auto
or NIGHT TIME ON
Settings
(motion activated)
From any of the above
settings.
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME ON
MODES
Turn the power “OFF”
for at least 90 seconds,
then back “ON”.
Is there power to the fixture?
• Check to see that the circuit breaker has not been tripped.
• Be sure the wall switch is in the “ON”position.
• Be sure that the bulbs are not burned out or broken.
Is the surrounding external ambient light too bright? (If so, the unit
may think it’s daytime.)
• Re-aim the head.
• Relocate or reposition the unit away from the light.
TURN OFF POWER BEFORE CONTINUING.
Is the wiring to the fixture loose?
• Check wiring, and reconnect if necessary using wire nuts
provided.
OUTDOOR LIGHTS DO NOT
COME ON WITH MOTION AT
NIGHT
Mode of
operation:
Set slide switch
on sensor to:
How to set
power switch:
6 Hour
NIGHT TIMEON then
Motion Activated
Lights should turn on
automatically at night
100% brightness for 6
hours, then reset to
regular auto motion
setting for the remainder
of the evening.
NIGHT TIME ON
6 HR
(6 Hours)
Note:
Once the light has come onin
the selected NIGHT TIMEONmode,
you cannot change the mode setting
until the next dawn. The light will
operate in the first NIGHT TIMEON
mode selected (2 hour, 4 hour or
6 hour), even if changed.
Keep the power to
the fixture on.
Continuous Override
Mode (standard
floodlight setting)
Lights should stay on
continuously both day
and night (must be reset
manually).
TEST
Turn the power “OFF”
for 5 seconds then
back “ON.”
Dusk to Dawn Setting
Override Mode
(activated only at night)
Lights should stay on
100% brightness from
dusk to dawn and then
reset to the AUTO or
NIGHT TIME ON setting
next dawn.
AUTO 4 MIN
or
AUTO 12 MIN
or
ALL NIGHT TIME ON
MODES
Turn the power “OFF”
for 5 seconds then
back “ON.”
(continued)
What to do if . . .