Filter
Top Products
25
114915
Application Chart
*Use power fastener with penetration control disc,
part number 015549.
IMPORTANT
• Recommended for use with Remington
®
power load strips and power fasteners.
• Model 498 users: DO NOT use power fasteners longer than 1
1
/
2
".
• If power fastener goes below the top surface of the board, use penetrating control
disc (see illustration below) or washered SPW-type power fasteners.
• Operators and bystanders must ALWAYS wear goggles and ear protection which
meet or exceed the accepted standards for adequate protection in your country. In
the USA, refer to ANSI standards. In Canada, refer to CSA standards.
.27 CALIBER strip loads for
powder actuated tools
Load Color Code
Stock Level Load Case
Number Number Strength Body Head
78757 3 medium brass Green
78758 4 heavy brass Yellow
78759 5 extra heavy brass Red