Filter
Top Products
11
Instructions For Assembly Of Shotgun (cont’d)
4. Now that the barrels have been locked into the receiver,
you must reattach the fore end to the barrels. Pull
outward on the mechanical latch in the center of the
fore end and place the fore end on the receiver. With
an upward swinging motion, lock the fore end onto
the barrels. Do not force the fore end into its locked
position on the barrels. If the latch does not go to
its final flat position, it may be necessary to push
it into place. Never force the latch in the flat position.
(See
Picture 18).
Loading and Unloading Your Shotgun
WARNING
Never load or fire the shotgun unless the barrels is locked into position on the receiver, and the fore end is locked in to the receiver and barrels.
WARNING
Make sure the shotgun is pointed in a safe direction and the trigger block safety is engaged at all times while loading and unloading.
NEVER allow your fingers or other objects to contact the trigger (s) while loading or unloading.
WARNING
Do not disengage the trigger block safety until you ar
e r
eady to fir
e and have the gun pointed safely downrange
W
ARNING
: DO NOT LOAD SHOTGUN UNTIL YOU ARE READY TO FIRE.
Picture 18
Picture 17A Picture 17B
Picture 17C
Picture 17D