Filter
Top Products
2
General Safety Instructions for Power Tools
NK håçï=vçìê=mçïÉê=qççä
Read and understand the operator’s
manual and labels affixed to the tool.
Learn the tool’s application and limita-
tions as well as the specific potential
hazards peculiar to this tool.
OK dêçìåÇ=vçìê=qççä
If your tool is equipped with an
approved 3-conductor cord and a 3-
prong grounding type plug to fit the
proper grounding type receptacle.
The green conductor in the cord is the
grounding wire. Never connect the
green wire to a live terminal.
PK hÉÉé=dì~êÇë=få=mä~ÅÉ
In working order, and in proper
adjustment and alignment.
QK oÉãçîÉ=^ÇàìëíáåÖ=hÉóë=^åÇ=
têÉåÅÜÉë
Form habit of checking to see that
keys and adjusting wrenches are
removed from tool before turning it
on.
RK hÉÉé=tçêâ=^êÉ~=`äÉ~å
Cluttered areas and benches invite
accidents. Floor must not be slippery
due to wax or sawdust.
SK qç=oÉÇìÅÉ=qÜÉ=oáëâ=lÑ=a~åÖÉêçìë=
båîáêçåãÉåí
Don’t use power tools in damp or wet
locations or expose them to rain.
Keep work area well lit. Provide ade-
quate surrounding work space.
TK hÉÉé=`ÜáäÇêÉå=^ï~ó=
All visitors should be kept a safe dis-
tance from work area.
UK j~âÉ=tçêâëÜçé=`ÜáäÇJéêççÑ
With padlocks, master switches, or by
removing starter keys.
VK açåÛí=cçêÅÉ=qççä
It will do the job better and safer at
the rate for which it was designed.
NMK rëÉ=oáÖÜí=qççä
Don’t force tool or attachment to do a
job it was not designed for.
NNK tÉ~ê=mêçéÉê=^éé~êÉä
No loose clothing, gloves, neckties or
jewelry (rings, wristwatches), to get
caught in moving parts. NON-SLIP
footwear is recommended. Wear pro-
tective hair covering to contain long
hair. Roll long sleeves above the
elbow.
NOK rëÉ=p~ÑÉíó=dçÖÖäÉë=EeÉ~Ç=mêçíÉÅJ
íáçåëF
t^okfkdW=The operation of any
power tool can result in foreign
objects being thrown into your eyes,
which can result in severe eye dam-
age. Before beginning tool operation,
always wear safety goggles or safety
glasses with side shields and a full
face shield when needed. We recom-
mend Wide Vision Safety Mask for
use over eyeglasses or standard
safety glasses with side shields.
Always wear eye protection which is
marked to comply wtih ANSI Z87.1.
Also, use face or dust mask if cutting
operation is dusty, and ear protectors
(plugs or muffs) during extended peri-
ods of operation.