Filter
Top Products
Model KT-190 and KT-200 Pipe Thawing Units
Ridge Tool Company10
Electrical Schematics
KT-190 Thawer
115V/60Hz
OUTPUT
TERMINALS
KT-200 Thawer
115V/60Hz
OUTPUT
TERMINALS
Service and Repair
WARNING
Service and repair work on this tool must be performed by
qualified repair personnel. Thawing unit should be taken
to a RIDGID Independent Authorized Service Center or re-
turned to the factory. All repairs made by Ridge service
facilities are warranted against defects in material and
workmanship.
When servicing this tool, only identical replacement parts
should be used. Failure to follow these instructions may
create a risk of electrical shock or other serious injury.
If you have any questions regarding the service or repair
of this machine, call or write to:
Ridge Tool Company
Technical Service Department
400 Clark Street
Elyria, Ohio 44035-6001
Tel: (800) 519-3456
E-mail: TechServices@ridgid.com
For name and address of your nearest Independent
Authorized Service Center, contact the Ridge Tool Com-
pany at (800) 519-3456 or http://www.ridgid.com