Filter
Top Products
14
OPERATION
RIGHT ANGLE DESIGN
See Figures 9 - 10.
���The impact driver features a right angle head design to reach
into tight areas.
WARNING
Hold tool by insulated gripping surfaces when
performing an operation where the screw may
contact hidden wiring. Contact with a “live” wire
will also make exposed metal parts of the tool “live”
and shock the operator.
Fig. 9
Fig. 10
WRONG
WARNING:
Battery tools are always in operating condition.
Therefore, switch should always be locked when
not in use or carrying at your side.
DRIVING OR REMOVING SCREWS
See Figure 8.
n
Place the direction of rotation selector in the correct posi-
tion for the operation.
n
Hold the driver with one hand.
n
Place the bit on the screw head and slowly depress the
paddle switch. We recommend starting the bit slowly for
more control.
n
As screw is driven, impacting will begin.
WARNING:
Do not drive a screw where there may be hidden
wiring behind the surface. Contact with a “live” wire
will make exposed metal parts of the tool “live” and
shock the operator.
Fig. 8