Filter
Top Products
9
FEATURES
KNOW YOUR JIG SAW
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
ANTI-SPLINTERING INSERT
The anti-splintering insert prevents splintering of the
workpiece material for a smoother cut. It is especially helpful
when cutting plywood.
BLADE GUARD
The wire blade guard helps protect the operator from
accidental contact with the saw blade.
CHIP SHIELD
A clear plastic chip shield on the front of your saw helps
protect against flying dust and chips.
NO-MAR PLATE
The no-mar plate has a smooth finish and can be snapped
on over the metal shoe of the jig saw. This makes it easier
to glide the tool along a delicate work surface without
marring it.
ORBITAL ADJUSTMENT KNOB
The orbital adjustment knob allows you to select five orbital
settings to cut materials of varying thickness and density.
RECESSED BLADE-SUPPORT ROLLER
The recessed blade-support roller ensures accurate cutting.
Its hard-wearing die-cast aluminum casing helps protect
against overheating.
TOOL-FREE BLADE CLAMP
The tool-free blade clamp does not require the use of a blade
wrench when installing or removing the blade.
TOOL-FREE SHOE ADJUSTMENT
With the tool-free shoe adjustment lever, you can make
quick changes to the bevel setting. The shoe can be angled
45˚ left or right for bevel cutting, with positive stops in 15˚
increments.
TRIGGER LOCK
The trigger lock prevents the saw from accidental starting.
The switch trigger cannot be depressed until the trigger lock
is depressed.
UNPACKING
This product has been shipped completely assembled.
Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACKING LIST
18V/24V Jig Saw
T-Shank Saw Blades (2)
Anti-Splintering Insert
Operator’s Manual
ASSEMBLY
WARNING:
If any parts are damaged or missing do not operate
this tool until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause
serious personal injury, always remove the battery
pack from the tool when assembling parts.