Filter
Top Products
PIR Solar Spotlight/PIR Solaire Lumière RSL-113
4
Install On the Pillar or Fence
1.Insert the L-clip into the hole on the
PIR Solar Spotlight body.
2.Twist the buttery nut to a proper position
to x the light on the pillar or fence.
Remarks for Installation
* The thickness of the fence or pillar is better to be more than 3.5cm
* Do not install the light where people can be easily to be hurt in case of drop.
* Install the light in horizontal level.
Install On the Pillar or Fence
1.Take the solar panel and panel base. 2.Drill two holes on the wall based in the
holes in the panel base, then insert in the
panel base, then insert the bulged tubes
into the holes. Finally x the panel base on
the wall by screws.
2.Twist the solar panel on the panel base.
4 Solar Panel Installation