Filter
Top Products
PIR Solar Spotlight/PIR Solaire Lumière RSL-113
6
7 Replace the parts
8 Problem Solving
9 Safety Guide
10 Technical Data
1. LED can’t be replaced
2. Battery replacement
* Turn the switch “off”
* See 3. PIR Solar Spotlight body installation
* Replace the batteries with 3pcs 1.2V AA
1300mAh Ni-MH rechargeable batteries
*Make sure the switch is “on”.
*Make sure the panel is not broken.
*Make sure the panel is installed in places free from shadow
*Make sure the panel is not polluted by dirt. If have, please clean it with water by soft
cloth. Do not use solvents. Take extreme care not to scratch the clear cover.
*The PIR Solar Spotlight is waterproof on normal conditions, but please make sure it is
not always exposed to a lot of water, or installed in some moist places, like bathroom.
*Make sure hands are not wet when replacing the batteries.
*Make sure not to reconstruct the PIR Solar Spotlight by yourself, to avoid any possible
malfunction, re or electronic shock.
*Make sure the PIR Solar Spotlight is not installed where the temperature is too high.
*Please notice that the Ni-MH batteries recharging capacity might decline under extreme
low temperature.
*The LED inside can not be replaced.
LED 2pc 1watt power LED (2 heads)
Battery 3pcs 1300mAh Ni-MH batteries
Sensor PIR sensor
Sense About 6m*90°
Light duration per sense 25~35 seconds
Material Plastic
Wire length About 5m