Ryobi BGH825 Grinder User Manual


 
Page 10
FEATURES – BGH825
KNOW YOUR BENCH GRINDER
See Figure 3c.
Before attempting to use your new tool, familiarize yourself
with all operating features and safety requirements. Carefully
read this operator’s manual before using your grinder.
ON/OFF SWITCH
Your BGH825 Bench Grinder features a front access On/Off
switch for convenience and safety.
MOTOR
Powered by a precision-built electric induction motor, your
bench grinder has sufficient power to handle tough grind-
ing jobs.
GRINDING WHEEL
Equipped with course and fine grinding wheels to suit most
applications.
Note: New wheels sometimes require dressing to true up
the face of the wheel.
SAFETY SHIELD AND SPARK DEFLECTOR
The safety shields and spark deflectors are adjustable for
operator convenience. Operating the grinder without these
features attached could result in serious injury. Do not grind
with the safety shield raised; always wear safety glasses for
personal protection.
WORK REST
The work rests are independently adjustable to compensate
for wheel wear. Before grinding, make certain the work rests
are adjusted properly. Generally the object being ground is
done slightly above center of the grinding wheel.
Adjust the distance between the wheel and the work rest to
maintain 1/16 in. or less separation as the diameter of the
wheel decreases with use.
WHEEL DRESSING TOOL
A buildup of metals, dirt, rust, etc. will become embedded
in the grinding wheel as it wears. Using the Wheel Dressing
Tool to clean the wheel of these ground-in particles will help
improve the grinder’s performance.
AUTO-ON WORKLIGHT
Your BGH825 Bench Grinder comes equipped with a
permanently mounted worklight that automatically lights
the work area for safer, more accurate grinding and
sharpening.
COOLANT TRAY
When grinding, metal objects become heated quickly. It is
important to keep moving the object back and forth across
the grinding wheel and to cool the object frequently using
the grinder’s Coolant Tray.
ON
SWITCH
SPARK
DEFLECTOR
(RIGHT)
SPARK
DEFLECTOR
(LEFT)
SHIELD RODS
(RIGHT AND LEFT)
SAFETY
SHIELD(S)
WORK REST
(LEFT)
WORK REST
(RIGHT)
WHEEL
GUARD
COOLANT TRAY
AUTO-ON
WORKLIGHT
OFF
MODEL BGH825
Fig. 3c