Filter
Top Products
13
WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating power tools. Failure to do so
could result in objects being thrown into your eyes
resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
APPLICATIONS
This product has been designed only for the purposes
listed below:
n Sharpening drill bits
n Sharpening lawn mower blades
n Sharpening chisels and flat screwdrivers
BASIC OPERATION
To be efficient and work as designed, your tools should be
kept sharp. Dull tools can and will cause accidents.
Bench Grinders are ideal for sharpening tools such as
chisels, planer blades, scissors, etc., and for removing rust
or corrosion.
WARNING:
Never sharpen or grind anything made of aluminum,
brass, or copper.
Grinders remove material rapidly so pressure is the key to
efficient grinding.
The proper way to sharpen a tool and avoid overheating is:
n Keep the object in constant motion, moving it at an even
pace.
n Never force a tool against the grinding wheel.
n Keep the tool cool by using either the coolant tray or a
pan of water.
n The grinding wheel should rotate “into” the object being
sharpened.
OPERATION
NOTE: Excessive pressure may damage the tool, cause the
motor to overheat, and prematurely wear down the grinding
wheel.
WARNING:
Excessive pressure on a cold wheel may cause the
wheel to crack.
Fig. 8
OFF
ON
SWITCH
USING COOLANT TRAY
See Figure 8.
The built-in coolant tray allows you to cool overheated
workpieces. Simply pull out the tray and fill half way with
appropriate coolant.
ON/OFF SWITCH
See Figure 8.
The Bench Grinder features a front access On/Off switch
for convenience and safety.
COOLANT
TRAY