Filter
Top Products
Page 9
ASSEMBLY
WARNING:
The sander should never be connected to a power sup-
ply when you are assembling parts, making adjustments,
cleaning, performing maintenance, or when the tool is
not in use. Disconnecting the tool will prevent accidental
starting that could cause serious injury.
ATTACHING THE DUST BAG
See Figure 3.
The dust bag provides a dust collection system for the sander.
Sanding dust is drawn up through the holes of the sanding
disc and collected in the dust bag during sanding.
Follow these steps to attach the dust bag.
■ Unplug the sander.
■ Using a slight twisting motion as shown in figure 3, firmly
slide dust bag assembly in blower exhaust on sander.
Fig. 3