Filter
Top Products
Page 2
TABLE OF CONTENTS
■ Product Specifications
.........................................................................................................
1
■ Table Of Contents
...............................................................................................................
2
■ General Safety Rules
.......................................................................................................
2-3
■ Specific Safety Rules
........................................................................................................
3-4
■ Features
..............................................................................................................................
6
■ Assembly
..........................................................................................................................
7-8
■ Operation
........................................................................................................................
9-15
■ Maintenance
......................................................................................................................
16
■ Exploded View And Parts List
......................................................................................
18-21
■ Service Information
............................................................................................................
22
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result in
electric shock, fire, and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
■ Keep your work area clean and well lit. Clut-
tered benches and dark areas invite accidents.
■ Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
■ Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.
Electrical Safety
■ Double insulated tools are equipped with a
polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a
polarized outlet. Do not change the plug in
any way. Double insulation eliminates the
need for the three-wire grounded power cord and
grounded power supply system.
■ Avoid body contact with grounded surfaces,
such as pipes, radiators, ranges, and refrig-
erators. There is an increased risk of electric
shock if your body is grounded.
■ Don’t expose power tools to rain or wet condi-
tions. Water entering a power tool will increase
the risk of electric shock.
■ Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges,
or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of
electric shock.
■ When operating a power tool outside, use an
outdoor extension cord marked “W-A” or “W.”
These cords are rated for outdoor use and reduce
the risk of electric shock.
Personal Safety
■ Stay alert, watch what you are doing, and use
common sense when operating a power tool.
Do not use tool while tired or under the influ-
ence of drugs, alcohol, or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
■ Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught
in moving parts.
■ Avoid accidental starting. Be sure switch is
off before plugging in. Carrying tools with your
finger on the switch or plugging in tools that have
the switch on invites accidents.
GENERAL SAFETY RULES